Double clamp T-Cycle extra long

The extended version of the double clamp of the T-Cycle Cockpit Mount offers a significantly increased mounting radius for recumbent trike accessories without sacrificing stability or clamping force. This XXL clamp measures a full 5 inches or 12.7 cm from the center of one clamped pipe to the center of the other clamped pipe. Thanks to the easily accessible screws, the clamp can be easily installed and permanently screwed on.

Available in two finishes. Be sure to use clamps that are properly sized for the pipe you are trying to clamp. The clamping width required is 1/2 inch or 12.7 mm. The variant with two 22.2 mm (7/8 inch) clamps weighs 112 grams. The clamp with 25.4 mm (1 inch) and 22.2 mm (7/8 inch) clamps weighs 104 grams. Milled from 6061 aluminum , black anodized Screws made of stainless steel.

Installation is simple: temporarily remove all screws, loop the clamp halves around the tubes, and reinstall the center two screws. When the center screws are slightly tightened, the Cockpit Mount can be aligned. Finally, add and tighten the outer screws.

If you have any doubts about which version will fit your recumbent, you can print out our measuring tool for round tubes here. If you need an adapter bushing, contact us by e-mail for a custom solution:

Download Measuring Tool for tubing diameter