T-Cycle
Weather protection fairing T-Cycle SPRING
Weather protection fairing T-Cycle SPRING
SKU:3090
In stock - Ships within 1-3 business days
Couldn't load pickup availability
- Choose the correct clamp size referring to the chart in the description
- Effective protection against cold wind and rain for your feet and lower legs
- The rider can still easily mount and dismount
- Simple assembly with a newly designed frame clamp for many recumbent and recumbent trike models
- The SPRING mount allows installation next to a Pinion gearbox or bottom bracket motors
- By keeping the clamp on the frame, the fairing can be mounted in exactly the same position again
- Can be removed quickly by loosening just two clamping screws
- The fairing is available in a clear or tinted version
- Space-saving storage when the fairing is not needed
- Length and width of the fairing mounted: 48 cm x 46 cm
- Length and width of the fairing including vaults: 56 cm x 46 cm
- Weight of fairing: 500 g
- Weight of SPRING Mount: 1000 g
Assembly instructions
Assembly instructions
Product information
Product information
Manufacturer
Importer
Description
The T-Cycle front fairing SPRING is the perfect solution for minimalists. It is small, light and compact (1500 g), aerodynamically advantageous and optimally protects the feet from rain and cold wind.
The relatively small design is insensitive to side winds and you can easily get on and off the recumbent bike or trike.
The fairing bubble is made of Lexan, a high-quality polycarbonate. It is very transparent, almost free of bubbles and bumps and allows the rider a good view through the front fairing. The bubble has an even thickness throughout and does not thin at the edges.
The bubble of the fairing can be stored rolled up to save space.
Suitable for many recumbent and trike models such as Catrike, Challenge, Hase, Flux, HP Velotechnik, Steintrikes and of course ICE.
| 1.625 inch | for ICE and Steintrike |
| 1.75 inch | |
| 1.8 inch | for Catrike |
| 2.0 inch | |
| 35 mm x 35 mm (square) | for Anthrotech |
| 50 mm | |
| 54 mm | for HP Velotechnik and AZUB |
| 60 mm |
The fairing is simply and easily mounted with a frame clamp on any recumbent bike or trike in the area of the front boom. The fairing can be removed by loosening just two frame clamp bolts. Since the clamp itself remains on the bike, you can later remount the fairing in exactly the same position.
See also the T-Cycle assembly video:
If you have any doubts about which frame clamp will fit your recumbent, you can print out our measuring tool for round tubes here.
